Posts Tagged 'computer'

New computer time: an idiots guide

Written for idiots by an idiot.

I never learn that those ten minute jobs are rarely so. I’ll expand this post later but here’s the last 2 days in a nutshell, and a list of resources for anyone setting up a similar system (or indeed for me for when I have to do it all again)

Skip this if you have a life *********
The system is:
Asus p6td deluxe – a variation on the p6t line that have had several generations to iron out the kinks. I got this board because there were several quality improvements but alas, failed to notice that Asus had removed 2 sata ports. In fact discovered since that Asus does this a lot. They also had removed the SAS ports (meh) and the floppy port (which was a big meh until the excitement of later)
12gb OCZ CL7 ram, which didn’t arrive so currently on 3g geil ho hum
intel x25 SSD 8-gb
300gb WD raptor (which I’ll use if the 80gb starts running out of space and for the print spool file and PS scratch disk)
4x WD green 1.5tb drives in raid 10. Yes they’re green and slow, but I had 3 already so I only needed one more to make the raid set. If I did it again I would’ve forked out for the blacks.
A huge asus graphics card, Nvidea GTX275
**********

And we’re back

I wont tell you what I did wrong, I’ll just summarise what I learnt:

Setting up raid. Never done this before: “how hard could it be”.

Read quickly and weep:
http://www.tomshardware.com/forum/269867-31-configure-asus-lone-sata-raid#t2047541

now before you get stuck in you’ll have to TLER your WD drives first. IF you have NO idea what that means, well the green blue and black drives are apparently not meant for raid arrays, but WD provides a tool that no one is supposed to have access to unless you ask nicely but isn’t difficult to find.

You create a bootable floppy, stick the WD utility on it and off you go. Except if you don’t have a floppy. In which case read this:
http://shifteightgeneration.com/content/wdtler-fix-tler-setting-wd-desktop-hard-drives

Read it anyway even if you do it tells you how to use the WD TLER utility.

Caveat: a few steps are wrongish – here’s the corrections:
5: Open up a command prompt and type cd C:ubcd411toolsubcd2iso

also see the “Some problems” post on that page.

If you get a crash on running tlerscan. then have a look at this:
http://forums.whirlpool.net.au/forum-replies.cfm?t=1363969

Summary: put your SSD on sata 1 and do one disk at a time (yawn).

Now you can go back to this:
http://www.tomshardware.com/forum/269867-31-configure-asus-lone-sata-raid#t2047541
and do the step-by-step

notes:
4: ^I is ctrl-I
Select option 1, then tab down though each option (ie choose your raid type – 10 in my case) then down to select drives. This is where you pick which drives will be in the raid – letting you use the SSD as the boot drive and not part of the raid.

Don’t be a big smartypants and install your OS first. You’ll find it wont work and you’ll have to re-install.
If you do have to reinstall don’t do what I did and just install it over the top. Do a secure erase first.
http://www.anandtech.com/storage/showdoc.aspx?i=3531&p=11

OK, where do you get secure erase from? And how to get it to work? Haven’t got that far yet, will update when I know.

So install your OS, pop you motherboard driver disk in and install everything (I installed the raid driver first in case a reboot for something else made it go tits-up).
Go into computer management > storage and you should see your raid. Initialise it as GBT, not MBR. (MBR cant handle partitions greater than 2TB, but you can only boot from an MBR). If this doesn’t make any sense and your setup is like mine you’ll be booting from the SSD, keep the raid as one great big drive, choose GBT, and set the cluster size to 32kb. (I’ve got lots of big files so that makes sense).

Now you’ll need to do things to your OS to make the SSD run sweetly, and apparently help it live longer. Although the rate these things are developing I can’t imagine you’ll be still using it in 4 years time. Everyone will be going: “ha 80GB? Hilarious – I paid like $400 for it too. I’ve got more than that in my iwatch”. Unless of course the global economy has finally collapsed taking civilisation with it, in which case this is as good as it got before the end of the age of enlightenment and we all start eating each other. (Shudder)
read this, or skip to my list, below (its about setting up ssd’s not canibalism):
http://forums.overclockers.co.uk/showthread.php?t=18073901

crikey what a palaver!

I have saved all of the pages listed here locally, so if any links break, let me know

update: setting up ssd

I used the list  in the link above, but found the tool below and ignored some items – mine is a conservative list, feel free to comment

SSD TWEAKER

http://www.filecluster.com/downloads/SSD-Tweaker.html

A tool to help ssd setup, it makes adjustments to registry – takes care of items greyed out below.

DISABLE PREFETCH
Hkey_local_machine\SYSTEM\CurrentControlSet \Control\Session Manager\Memory Management\PrefetchParameters
Change Enableprefetcher value from 3 to 0

ENABLE CLEAR PAGEFILE AT SHUTDOWN
Hkey_local_machine\SYSTEM\CurrentControlSet \Control\Session Manager\Memory Management
Change clearPageFilesAtShutdown from 0 to 1

ENABLE LARGE SYSTEM CACHE
Hkey_local_machine\SYSTEM\CurrentControlSet \Control\Session Manager\Memory Management
Change LargeSystemCache value from 0 to 1

DISABLE 8.3 FILENAME CREATION – didn’t do it (my value was 2)
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\FileSystem
Change NtfsDisable8dot3NameCreation value from 0 to 1

NTFS MEMORY USEAGE INCREASED – increased from 0 to 2 in my case
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\FileSystem
Change NtfsMemoryUsage value from 1 to 2

DISABLE DATE STAMPING
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\FileSystem
Change NtfsDisableLastAccessUpdate value from 0 to 1

DISABLE SUPERFETCH
Hkey_local_machine\SYSTEM\CurrentControlSet\Contro l\Session Manager\Memory Management\PrefetchParameters
Change EnableSuperfetch from 3 to 0

DISABLE SUPERFETCH 2 (optional)
In computer management services set service Superfetch to Disable

Heres one I added:

MOVE SPOOL FILE (windows 7)
Open Devices and Printers. Click on any printer. Choose printer server properties from just below address bar.  Click on advanced tab

DISABLE WINDOWS SEARCH (do I want to disable windows search on all drives!? Ignored!)
In Computer Management > Services set Windows Search to Disable

DISABLE DEFRAG – disabled for drive C only
In properties of SSD drive (my computer) open the defrag service and go to the defrag scheduler
Un-check schedule defragmentation for this drive

DISABLE DEFRAG 2 (optional) ignored
In Computer Management > Services set Defragment to Disable

DISABLE PAGEFILE – set to system managed for E, disabled on C.
System Properties > Advanced, turn off for SSD. Set up for 512min/512max on your second platter drive (if present).
NB: Value is just my preference, feel free to experiment. Having no pagefile at all can cause problems with some games.

DISABLE HIBERNATION – ignored
Type CMD in search, right-click Command Prompt or Cmd.exe, and click Run as Administrator. Type “powercfg.exe -h off”

WRITE CACHE ENABLE
Right click My Computer, properties, device manager. Enable write cache and advanced in policies for the SSD drive
Set Write cache + Advanced performance to Enable

DISABLE DRIVE INDEXING
In My Computer, in the properties of the SSD drive disable drive indexing (untick the box)

DISABLE SYSTEM RESTORE – ignored
Start Menu > Right-Click Computer > Properties > Advanced System Settings > System Protection Tab > Configure > Turn off system protection

MOVE ENVIRONMENT VARIABLES TO PLATTER DRIVE – ignored
System Properties > Advanced, move TEMP and TMP to a platter drive
Also move the User TEMP and TMP to a platter drive

DISABLE ReadyBoot – ignored
Launch the “Performance Monitor” program (via Administrative Tools). Then on the lefthand side of your screen click “Data Collector Sets”, and underneath that heading click “Startup Event Trace Sessions”. Now on your righthand side you’ll see a list that includes ReadyBoot, and you’ll see the word ‘enabled’ beside the word ‘Readyboot’. Double clicking the list item brings up the ReadyBoot Properties dialog. This dialog has a number of tabs. Pick the “Trace Session” tab. Finally, uncheck the “Enabled” checkbox on that tab

MOVE USERS “SPECIAL” FOLDERS TO PLATTER DRIVE (optional) – ignored (I’d moved most of these already)
http://forums.microsoft.com/TechNet/…2114&SiteID=17
This refers to moving My Doc, My Pics, Downloads etc. that are usually inside Users folder on the root of your boot drive to your platter drive.

MOVE WEBCACHE FOR MS IE TO PLATTER DRIVE – STILL TO DO
Open IE > Internet Options > Tools > Internet Options > General Tab > Browsing History. After this has been done you will need to log off and back on again for the cache to be moved

MOVE WEBCACHE FOR FIREFOX TO PLATTER DRIVE  – STILL TO DO
Type about:config into the address bar. Click OK to the warning message. Right click somewhere on the opened age and go to new -> String. Enter browser.cache.disk.parent_directory into the first dialog box and then the location you would like the cache in the second. Restart the browser and then this should now be moved. To check type about:cache into the address bar and all the info about the cache will be displayed

MOVE APPS DATA FOLDER TO PLATTER DRIVE – wrong link given (I’ve manually moved several folders to platter drive including:
Bridge Cache
Camera RAW Cache
Font Agen Pro Data
Outlook files (psts)
and spool file as mentioned.

More things that went wrong

If I did it again I would turn UAC off from the word go, theres been a few things that dont play niceley with it.
Font agent pro doesn’t like windows 7, their support sent me a 4.1 beta which is working OK except for type one fonts in photoshop

Doing the monitor calibration had its issues – as does the monitor itself (an HP LP2475w) more on that later.

There are a few minor bugs and niggles in system software, hopefully these will be resolved in the fullness of time


Calendar

July 2017
M T W T F S S
« Feb    
 12
3456789
10111213141516
17181920212223
24252627282930
31  

twitter